Server Frage

[cracky 0]

Hi leute

ich hab ne frage undzwaaaar :

wie kann ich über bdfsm oder so 2 server starten? wenn ich den einen für die 192.168.1.10 starte und dann den nächsten auf die blabla.1.11 dann kommt ne fehlermeldung!

wie bekomm ich das hin?

auf der letzten lan hab ich immer den 2ten mit dedicated server.exe gestartet! aber der stürzt seit neustem immer ab..also das muss!! doch auch mit dem servermanager gehen!

bitte helft mit!!!!

danke

[Guest]

Hi!

Klar dass da ne Fehlermeldung kommt wenn Du ne 2te IP benutzen willst, Dein Rechner aber nur eine IP hat.

Wie Du 2 Server auf dem gleichen PC mit dem BFSM starten kannst findest Du in diesem Userguide:

http://www.blackbagops.com/files/bfsm20ug.pdf

bzw. hier dass Du nicht suchen musst:

Multiple servers on a single computer

Server Manager suports running multiple BF1942 game servers on a single computer.

Server Manager will correctly identify and monitor the server process started by it and will not interfere with other servers running on the same computer.

To run multiple Windows servers on a single computer:

1. Copy the dedicated server program folder to another location on your hard disk.

2. Delete the bf1942.pid file in the copied server folder (if present).

3. Configure each server to use unique server port addresses on the Server dialog page in BFSM.

Hover your mouse over a port address control to see the default port address in the tooltip.

4. Configure each instance of BFSM to use a unique server port address using the -port command-line option (see "Command-line options" for more information).

5. Server configuration is now complete and each server can be started.

To run multiple Linux servers on a single computer:

1. Create a new directory called "configs" under /usr/bf1942/. This directory will be used to store configuration files for each server instance.

2. Create a directory for each server that you want to run under /usr/bf1942/configs/. For example;

/usr/bf1942/configs/bf1942,

/usr/bf1942/configs/dc and

/usr/bf1942/configs/eod.

3. Start each instance of BFSMD with a unique BFSM server port address and +overlayPath with the corresponding config directory;

# bfsmd -port 14667 -path /usr/bf1942 +overlayPath /usr/bf1942/configs/bf1942

# bfsmd -port 14668 -path /usr/bf1942 +overlayPath /usr/bf1942/configs/dc

# bfsmd -port 14669 -path /usr/bf1942 +overlayPath /usr/bf1942/configs/eod

Note: Always use fully-qualified paths with +overlayPath (fully-qualified paths start at the root

directory) otherwise bfsmd will not correctly monitor server processes (detect false server crashes).

4. Connect to each instance of Server Manager with BFRM and configure each server to use unique server port addresses on the Server dialog page.

5. Server configuration is now complete and each server can be started.

The Linux BF1942 server will store server settings in a directory called "settings" in the +overlayPath directory. For example, if your overlay path directory is /usr/bf1942/configs/dc, the server's config files will be stored in /usr/bf1942/configs/dc/settings.

About server port addresses

You must ensure that each server instance is configured to use unique port addresses on the Server dialog page in BFSM/BFRM and that each instance of BFSM(D) also uses a unique port.

Use the default port address for each server port and BFSM on the first server and then keep incrementing the default port address by one for each new server that you add. For example;

/usr/bf1942/configs/bf1942 14567, 4711, 14690, 22000, 23000, 14667

/usr/bf1942/configs/dc 14568, 4712, 14691, 22001, 23001, 14668

/usr/bf1942/configs/eod 14569, 4713, 14692, 22002, 23002, 14669

[cracky 0]

nene der hat scho 2 netzwerkkarten drinne

[Guest]

Dann wäre es vielleicht sinvoll die Fehlermeldung hier zu posten...