Standalone Server VoIP

[Brainer_nc 0]

Hallo Leute,

bin dabei mir einen Standalone Server zu basteln,

geht recht gut!

Nur weiss ich leider nicht wie das mit dem VoIP funzt.

In meinem BF2 Ordner gibt es eine VoIP.exe!

Muss ich diese starten auf dem Server?

Wie verbindet sich der Spielserver mit dem VoIP Server?

In den Settings vom Spieleserver kann ich einiges anklicken,

b.z.w auf Enable setzen, und dann?

Kann mir jemand helfen?

Gruß

Brainer

[Gast]

Hi!

Wie du den VoIP Server konfigurieren/einsetzen kannst findest du doch in der readmeserver.txt...

========================================================================

VoIP

========================================================================

STANDALONE VoIP SERVER

Battlefield 2 supports running a remote VoIP server. Running the VoIP

server remotely takes load off the main game server, and so increases

performance.

SETUP

In the Battlefield 2 Server Launcher:

- VoIPEnabled

  Enables VoIP in Battlefield 2.

- VoIPServerRemote

  Enable this if you would like to run VoIP via a remote server.

- VoIPServerRemoteIP

  Enter the IP address of the remote VoIP server.

- VoIPServerPort

  Specifies the Battlefield 2 server socket used to communicate with the

  Remote VoIP Server.

- VoIPBFClientPort

  Specifies the Battlefield 2 client socket used to communicate with the

  Remote VoIP Server.

- VoIPBFServerPort

  Specifies the socket on the Remote VoIP Server used to communicate

  with the Battlefield 2 client and the Battlefield 2 server.

- VoIPSharedPassword

  Here you can specify a password to be used to access the VoIP server.

- VoIPQuality

  Here you can specify the VoIP quality. Higher values will increase

  the quality of the transmitted sound, and will also require more

  bandwidth.

  - LAN servers started via the front end have a default quality setting

    of 5, the highest.

  - The Battlefield 2 Server Launcher defaults to a quality setting of 3.

    This is best for internet games. For LAN games you can increase this

    to improve the transmission quality.

The Battlefield 2 Standalone VOIP Server can be installed on a separate

machine by following the install procedure; select custom install and

select BF2 VOIP server.

You may need to edit the 'voip.con' file on the standalone VoIP

server. By default this file contains:

  55125 no_password

- '55125'

  This is the default port assignment the Battlefield 2 Server will use

  to communicate with the Standalone VoIP Server. This number must match

  the one in VoIPServerPort, set in the Battlefield 2 Server Launcher.

- 'no_password'

  This password must match the one set in VoIPSharedPassword in the

  Server Launcher.

MULTIPLE INSTANCES

You can have multiple instances of the Battlefield 2 Server connected to

the Battlefield 2 Standalone VoIP Server. To do this you must ensure

that each instance connects via an unique port. For example:

- Instance 1

  VoipServerPort 55127

  VoipBFClientPort 55128

  VoipBFServerPort 55129

- Instance 2

  VoipServerPort 55130

  VoipBFClientPort 55131

  VoipBFServerPort 55132

[Brainer_nc 0]

Vielen Dank Fisch.666

Wer lesen kann ist klar im Vorteil....

Werde es gleich mal antesten.