Rob.Dexter 0 Melden Geschrieben 8. Dezember 2005 Changelog: * Doom 3 Resurrection of Evil: Playing the game under Windows XP MCE with CrossFire? enabled no longer results in ghosting effect being noticed. Further details on this resolved issue can be found in topic number 737-21187 * EverQuest II: Playing the game on a system containing an ATI Radeon® X1800 series, no longer results in the operating system failing to respond after approximately 5 minutes of game play. Further details on this resolved issue can be found in topic number 737-21189 * FarCry: Launching the game on systems using an ATI Xpress 200 series product and running the Windows XP operating system no longer results in the operating system failing to respond. Further details on this resolved issue can be found in topic number 737-20978 * Quake4: Selecting the Ultra Quality option within the game no longer results in the game failing to load after the restart required by the game. Further details on this resolved issue can be found in topic number 737-20981 * Enabling clone mode, followed by playing a video clip, no longer results in the underscan/overscan option failing to work when using Theater mode. Further details on this resolved issue can be found in topic number 737-20973 * Connecting a display device using an interlink cable to the ATI Radeon® X800 CrossFire? Edition, no longer results in CrossFire? becoming disabled if the interlink cable is disconnected from the Radeon® X800 CrossFire? and then reconnected. Further details on this resolved issue can be found in topic number 737-20977 * Catalyst® Control Center: Attempting to extend the desktop display when using a CRT, TV and DFP display devices no longer results in display corruption being noticed on the primary display adapter. Further details on this resolved issue can be found in topic number 737-20982 * Connecting a CRT and a TV to an ATI Radeon® X300/600 series and attempting to enable clone mode, intermittently no longer results in extended desktop mode being applied. Further details on this resolved issue can be found in topic number 737-20983 * Corruption is no longer noticed within the Catalyst® Control Center once a VPU Recover event is triggered. This issue is known to occur under the Windows XP MCE operating system when using an ATI Radeon® X1800 series product. Further details on this resolved issue can be found in topic number 737-20984 * Connecting an HDTV as the only display device using the component video connector on an ATI Radeon® X1300 no longer results in the display image shrinking when making changes to either AA or AF found in the 3D aspect page of the Catalyst® Control Center. Further details on this resolved issue can be found in topic number 737- 21186 * Connecting a 30 inch Apple Cinema Display to an ATI Radeon® X1300 series that is installed in a system running Windows 2000, no longer results in the display image being off center. Further details on this resolved issue can be found in topic number 737-21188 * Color corruption is no longer noticed when hot unplugging and hot plugging an LCD display from an ATI Radeon® X1800 series using the DVI connector. Further details on this resolved issue can be found in topic number 737-21190 * The TV Format now matches the TV Output when enabling TV after boot of the operating system. Further details on this resolved issue can be found in topic number 737-21196 * Enabling extended desktop mode followed by playing a DVD at 480i no longer results in corruption being noticed when moving the playback window to the secondary display device. Further details on this resolved issue can be found in topic number 737-21191 * Connecting an Apple Cinema display device to an ATI Radeon® X1800 series no longer results in the failure to playback a DVD when using the ATI DVD Player. Further details on this resolved issue can be found in topic number 737-21192 * Playing an HQV DVD using the WinDVD 5.0 player on systems containing an ATI Radeon® X1800 series, and running the Windows XP operating system, no longer results in Poor video playback quality being noticed. Further details on this resolved issue can be found in topic number 737-21193 * Catalyst® Control Center: Attempting to extend the desktop display when using a CRT, TV and DFP display devices no longer results in display corruption being noticed on the primary display adapter. Further details on this resolved issue can be found in topic number 737-20982 * Using WinDVD to playback a DVD title while having the Catalyst® Control Center running, no longer results in the playback of the DVD pausing momentarily. Further details on this resolved issue can be found in topic number 737-21194 * The 1080i optimum mode is now available in the Digital Panel properties when connecting both a DFP and a CRT to an ATI Radeon® X850 series. Further details on this resolved issue can be found in topic number 737-21197 * Catalyst® Control Center: Proceeding through the step by step process to enable the Component Video display, followed by applying a desktop resolution of either 1280x720 or 1920x1080 no longer results in the Custom Setting box failing to appear when clicking on the Add button. Further details on this resolved issue can be found in topic number 737-21195 * The Help page is now available for the Digital Panel Properties page found in the Catalyst® Control Center. Further details on this resolved issue can be found in topic number 737-21198 * Windows Movie Maker: Captured *.avi files no longer appear corrupt in color during playing back. Further details on this resolved issue can be found in topic number 737-21199 * Scheduling multiple TV recordings no longer results in the audio being distorted in some of the captured TV recordings. Further details on this resolved issue can be found in topic number 737-21200 * The Capture Video Preview image no longer appears off center when using a PAL version of the ATI Theater? 550 Pro. Further details on this resolved issue can be found in topic number 737-21201 * The tool tip for the Contrast slider bar found in the Catalyst® Control Center is now translated properly for Traditional Chinese. Further details on this resolved issue can be found in topic number 737-21202 * The slider bars found in the Overdrive aspect page of the Catalyst® Control Center are now the proper length when selecting Italian as the language of choice. Further details on this resolved issue can be found in topic number 737-21203 * Dashes are no longer displayed in the front of the ASIC name when selecting the Magyar language option for the Catalyst® Control Center. Further details on this resolved issue can be found in topic number 737-21204 * The lower portion of the scroll bar found in the All Settings aspect page of the Catalyst® Control Center is no longer missing. Further details on this resolved issue can be found in topic number 737-21205 Performance Steigerung (nur DualCore & Hyperthreading CPUs): * 3DMark05 gains as much as 5.7% * 3DMark03 gains as much as 3.3% * 3DMark2001 SE gains up to 10% * Aquamark 3 gains up to 16% * Comanche 4 improves as much as 20% * Far Cry gains as much as 25% on some product configurations * Half-Life 2 performance improves as much as 8% * Splinter Cell improves as much as 8% in certain parts of the game * Tomb Raider Angel of Darkness runs as much as 10% faster * Unreal Tournament 2004 framerates improve as much as 10% Catalyst 5.12 Windows XP Professional x64 Edition - Driver Download Catalyst 5.12 Windows XP Professional 32Bit Edition - Driver Download
Vh_Helmi 0 Melden Geschrieben 9. Dezember 2005 So viele Fehler! Mir sind drei der beschriebenen Fehler aufgefallen. Was mir komisch vorkommt sind die hohen Performancegewinne durch den neuen Treiber. Was ist davon zu halten?
night-biker87 0 Melden Geschrieben 9. Dezember 2005 ich würde sagen das stimmt so weit mit den Performencgewinnen, weil die ja Treiber für Treiber weitere optimierungen vornehmen. Was nur sicher net stimmt is die hohe Prozentzahl, die übertreiben bei so was immer.
Pedder 864 Melden Geschrieben 9. Dezember 2005 hab ihn auch geladen... seit dem treiber hab ich bei special forces im nachtsichtgerät so komische grüne streifen die von oben nach unten verlaufen, voll grausam... ich poste nachher mal n screen
Rob.Dexter 0 Autor Melden Geschrieben 16. Dezember 2005 (bearbeitet) Jungs ich wollte mal fragen ob hier einer den ATI Catalyst 5.12 CCC mit einen Windows X64 auf seinem System zu laufen hat? Ich hab das Microsoft .NET Framework 1.1 (32Bit) und das Microsoft .NET Framework 2.0 64Bit installiert, ohne Version 1.1 startet das CCC nicht! Leider übernimmt das CCC die Grafikeinstellungen nicht und setzt sie bei jeden Restart wieder auf Standart! Das heißt BF2 ohne AA, AF und in relativ schlechter Bildqualität. Da der 5.12 nur in der CCC Version angeboten wird, hab ich jetzt wieder den 5.11 CP installiert, hat einer ähnliche Erfahrungen oder n Tipp zur Problemlösung? Ich warte jetzt auf die DNA 64Bit CP VERSION vom 5.12, naja abwarten und Tee drinken. Bearbeitet 16. Dezember 2005 von Rob.Dexter
ronmosx 0 Melden Geschrieben 16. Dezember 2005 Schaue mal hier Ich habe noch den 5.11 drauf weil ich an diversen Stellen gelesen habe, dass BF2 schlechter bzw. langsamer läuft. Werde die Version ohne CCC am Weekend mal installieren.
Rob.Dexter 0 Autor Melden Geschrieben 16. Dezember 2005 Schaue mal hier Ich habe noch den 5.11 drauf weil ich an diversen Stellen gelesen habe, dass BF2 schlechter bzw. langsamer läuft. Werde die Version ohne CCC am Weekend mal installieren. Leider wird bei planet3dnow ja auch nur die 32Bit Version vom 5.12 CP angeboten, 64Bit bleibt ja CCC edit: ich hab jetzt noch das Microsoft .NET Framework 1.1 (32Bit) SP1 installiert, und es funzt jetzt endlich auch AA und AF
Cosmo.de 0 Melden Geschrieben 16. Dezember 2005 ich hatte mit dem 5.12er grafikfehler auf den sf maps mit nachtsichtgerät, daher wieder zurück zum 5.11er.
Gilgamesh 0 Melden Geschrieben 16. Dezember 2005 Die Leute, welche hier diskutieren, wissen es ohnedies, Ihr seid ja Profis, für die anderen, lest Euch durch, ob ein Treiber überhaupt etwas für Eure Graphikkarte bringt. Es ist nicht immer eine Verbesserung wenn man sich den neuesten Treiber lädt, zuweilen funktioniert der alte besser, da die eigene Karte gar nicht berücksichtigt wurde, bei dem Treiber..... Und man sollte nie den Satz vergessen ?don?t touch running systems?.....
